Products
Sealers and Coatings
Solvent-Based Concrete Sealer
Lacquer exterior grade sealer that forms a deep-penetrating, protective topcoat that has superior adhesion to concrete, polymer concrete coatings, unglazed tiles, and masonry.
High or Low Gloss Lacquer Exterior Grade Sealer
NewLook Solvent-Based Sealer is a lacquer exterior grade sealer. It is an acrylic in a VOC exempt* solvent. This sealer forms a protective topcoat that has superior adhesion to concrete, polymer concrete coatings, unglazed tiles, and masonry. It resists water, stains, and a variety of chemicals. It enhances and deepens colorants used in decorative concrete. May be used as a cure and seal.
Features & Benefits
- High or Low Gloss
- Excellent Water Resistance and Durability
- Excellent UV resistance
- Fast Drying
- Exempt voc’s
- Exceptional performance in abrasion, impact and wear resistance
- Excellent Adhesion to Metal, Concrete or Plastic
- Easy application
Resources & Packaging
COVERAGE ::
1G covers approx. 300 – 500 sq ft
FINISH ::
High Gloss, Low Gloss & Wetlook
PACKAGING ::
1G, 5G & 55G
Application of NewLook Solvent-Based Concrete Sealer
NewLook’s Solvent-Based Concrete Sealer may be applied with solvent resistant pump sprayer or roller. Apply the sealer when ambient and surface temperature is between 40°F (4°C) and 90°F (32°C) and will not fall below freezing within the initial 8 hours. Do not apply on foggy, rainy to extremely humid days. On hot days, applications should be done during the cooler hours and when the surface is under shade or non-direct sunlight. Assure surface is dry and free of moisture that could interfere with bonding and cure. Review TDS for more information.
Applications
- Concrete
- Brick
- Masonry
- Stone
- Tiles
- Aggregate
- Natural and artificial stone
- Stucco
- Interior & Exterior
- Surfaces